|
|
|
3-Bend Handrails 3-Bend Handrails are measured by the length of the "B" measurement in the diagram above. (The distance between Center of Rail to the Center of Rail.) The difference between the 3-Bend handrail and the 2-Bend Handrail is the "C" dimension in the diagram above. The difference is subtle, but the 3-bend stair rail has a section that is "Straight" for a while, and then starts the 2nd bend. Our Handrails are made of 1.90" O.D. x .049" or .065" wall, 304 stainless steel tube with mirror finish. The difference between "Residential grade" and "Commercial Grade" is the thickness of the steel wall on the railing. The Commercial Grade Rail is the thicker grade, and therefore, the stronger railing. Order Anchor Socket Kits (below) separately. Custom dimension handrails are available on a special order basis. Customer shall confirm measurements on special orders. Residential Grade 3- Bend Hand Rails (1.90" x .049" wall) Commercial 3-Bend Handrails (1.90" x .065" wall) If This is for a New Installation, Order Anchor Kit Separately. Above: SS Cover Plates = Stainless Steel Escutcheon Plates
Anchors can be shipped in advance via UPS.
Actual Hand Rails Must ship via Motor Freight Carrier. Sterling Pool On-Line Swimming Pool Catalog |
|
|